Modular Plugs
A complete variety of UL Recognized modular plugs are available. All plugs have 15 micro inches* of gold plating on the contacts which meet all standard applications for voice and data. Flat satin stranded, round stranded, and round solid cables are accommodated. Keyed, MMJ, DEC types, shielded and category 5 versions are available. Flat modular cable types accept 24-28 AWG, stranded. Round cable types accept 24-26 AWG, stranded or solid.

Part
No.

Description Ty

   300062

   4P4C Handset Plug For Flat Satin, Stranded
   300064

   6P4C Plug For Flat Satin, Stranded RJ11
   300066

   6P6C Plug For Flat Satin, Stranded RJ12
   300068

   8P8C Plug For Flat Satin, Stranded RJ45
   300164

   6P4C Plug For Round Twisted Pair, Solid RJ11
   300166

   6P6C Plug For Round Twisted Pair, Solid RJ12
   300168

   8P8C Plug For Round Twisted Pair, Solid RJ45
   300168K

   8P8C Keyed Plug For Round Twisted Pair, Solid RJ45
   300160

   DISCONTINUED RJ50
   300264

   6P4C Plug For Round Twisted Pair, Stranded RJ11
   300266

   6P6C Plug For Round Twisted Pair, Stranded RJ12
   300268

   8P8C Plug For Round Twisted Pair, Stranded RJ45
   300066D

   6P6C DEC Offset Plug For Flat Satin MMJ
   300068K

   8P8C Keyed Plug For Round Twisted Pair, Stranded RJ45
   300068S

   8P8C Shielded Plug For Round Twisted Pair, Solid   DISCONTINUED RJ45
   300568

   8P8C Category 5 Plug For Round Twisted Pair, Solid RJ45
   300566EZ

   6P6C EZ-RJ12 Plug  (see below) RJ12

   300568EZ 

   8P8C EZ-RJ45 Category 5 Plug (see below)  RJ45
   300568L 

   8P8C Category 5 Liner Plug For Round Twisted Pair, Solid RJ45
   300568S

   8P8C Shielded Category 5 Liner Plug For Round, Solid RJ45
   300668EZ

   8P8C EZ-RJ45 Category 6 Plug   NEW (see below) RJ45
  300668SEZ

   8P8C EZ-RJ45 Shielded Category 6 Plug   NEW (see below) RJ45

   CXB300EZ

   Category 6 Boot with Strain Relief Boot

s

s

s

s

 

 

 

 
EZ RJ45 Modular Plugs
The new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to maintain Category Five, and even enhanced Category 5 and Category 6 capabilities. (50 u in. gold)
The EZ-RJ12™ and both EZ-RJ45™ can be crimped with most any standard tool, then trimmed with a cutter or small utility knife. However, the new BD45000 crimp tool crimps and trims the exposed conductors in one operation. The vertical action of the tool makes a uniform and positive crimp.

PartNo.

Description
   300566EZ

   6P6C EZ-RJ12 Plug RJ12
   300568EZ  

   8P8C EZ-RJ45 Category 5 Plug (solid or stranded) RJ45
   300668EZ

   8P8C EZ-RJ45 Category 6 Plug   NEW  (solid or stranded) RJ45
   300668SEZ

  8P8C EZ-RJ45 Shielded Category 6 Plug   NEW  (solid or stranded) RJ45
   BD45000

-

   Crimp and Trim Tool for EZ RJ12, EZ RJ45 Cat 5 & 6 ----
   BD45000BL

-

  Replacement Blades ( 2 per Pkg ) for BD45000 Tool ----
   CXB300EZ

-

  Cable Boot with Strain Relief ( Required for Cat 6  ) ----
   CXB500EZ

-

  Cable Boot SNAGLESS  Cat 5 (color: clear) NEW ----
   CXB600EZ

-

   Cable Boot SNAGLESS Cat 6 (color: clear) NEW ----

 

           

     

                        

   Video Demo                                                                                                 

  BD45000 Crimp & Trim Tool

  EZ-RJ45 Cat 6    Shielded with SNAGLESS Boot       

CXB500/600   Snagless Boot 

 

 

            
 

Back to Index

FOR TECHNICAL SUPPORT:    PHONE 973-347-4040 / FAX973-347-2111         

 

Category Five Liner Plugs
Category 5 Liner Plugs are supplied with an insertable liner for the conductors. This is also known as a “Wire Bar” style. The separated conductors are inserted into the liner, cut off squarely at bottom, inserted into the RJ45 plug, then perfectly crimped. (Use CBX300 series boots for a proper Category 5 assembly.
Part
No.
Description

                

300568L

 8P8C Category 5 Liner Plug For Round  Twisted Pair, Solid

RJ45
300568S

 8P8C Shielded Category 5 Liner Plug For Round, Solid

RJ45

Wall Jacks
Plastic wall jacks are furnished with mounting hardware for easy installation. The Non-UL types are very economical and are to be used where UL is not required. 15 micro inches of gold plate on the contacts is standard on all jacks. Rounded configuration, rear wiring terminals allow these wall plates to fit all standard receptacle boxes.
Part
Number
Description
  300004IV     4C Ivory Flush Mount Single Jack, Non-UL
  300004WH     4C White Flush Mount Single Jack, Non-UL
  300006IV     6C Ivory Flush Mount Single Jack, Non-UL
  300008IV     8C Ivory Flush Mount Single Jack, Non-UL
  300014IV     4C Ivory Flush Mount Dual Jack, Non-UL
  300014WH     4C White Flush Mount Dual Jack, Non-UL
  300016IV     6C Ivory Flush Mount Dual Jack, Non-UL
  300018IV     8C Ivory Flush Mount Dual Jack, Non-UL
  300090     4C Ivory Wall-Phone, 3 Jacks, Non-UL
  300094IV     4C Ivory Wall-Phone Jack, Non-UL
  300094WH     4C White Wall-Phone Jack, Non-UL
  300095     4C Steel Wall-Phone Jack, Non-UL
  300104     4C Ivory Telephone/TV Jack, Non-UL
  301004WH     4C Ivory Flush Mount Single Jack, UL
  301006WH     6C Ivory Flush Mount Single Jack, UL
  301008WH     8C Ivory Flush Mount Single Jack, UL
  301014WH     4C White Flush Mount Dual Jack, UL
  301016WH     6C White Flush Mount Dual Jack, UL
  301018WH     8C White Flush Mount Dual Jack, UL
  301094WH     4C White Wall-Phone Jack, UL

FOR TECHNICAL SUPPORT:    PHONE 973-347-4040 / FAX973-347-2111                      21

Hit Counter