 |
 |
| Modular Plugs |
| A complete variety of UL Recognized modular plugs are available. All plugs have 15 micro inches* of gold plating on the contacts which meet all standard applications for voice and data. Flat satin stranded, round stranded, and round solid cables are accommodated. Keyed, MMJ, DEC types, shielded and category 5 versions are available. Flat modular cable types accept 24-28 AWG, stranded. Round cable types accept 24-26 AWG, stranded or solid. |
|
Part |
Description | |
|
300062 |
4P4C Handset Plug For Flat Satin, Stranded | — |
| 300064 | 6P4C Plug For Flat Satin, Stranded | RJ11 |
| 300066 | 6P6C Plug For Flat Satin, Stranded | RJ12 |
| 300068 | 8P8C Plug For Flat Satin, Stranded | RJ45 |
| 300164 | 6P4C Plug For Round Twisted Pair, Solid | RJ11 |
| 300166 | 6P6C Plug For Round Twisted Pair, Solid | RJ12 |
| 300168 | 8P8C Plug For Round Twisted Pair, Solid | RJ45 |
| 300168K | 8P8C Keyed Plug For Round Twisted Pair, Solid | RJ45 |
| 300160 | 10P10C Plug For Round Twisted Pair, Solid | RJ50 |
| 300264 | 6P4C Plug For Round Twisted Pair, Stranded | RJ11 |
| 300268 | 8P8C Plug For Round Twisted Pair, Stranded | RJ45 |
| 300066D | 6P6C DEC Offset Plug For Flat Satin | MMJ |
| 300068K | 8P8C Keyed Plug For Round Twisted Pair, Stranded | RJ45 |
| 300068S | 8P8C Shielded Plug For Round Twisted Pair, Solid | RJ45 |
| 300568 | 8P8C Category 5 Plug For Round Twisted Pair, Solid | RJ45 |
| 300566EZ | 6P6C EZ-RJ12 Plug | RJ12 |
| 300568EZ | 8P8C EZ-RJ45 Category 5 Plug | RJ45 |
| 300568L | 8P8C Category 5 Liner Plug For Round Twisted Pair, Solid | RJ45 |
| 300568S | 8P8C Shileded Category 5 Liner Plug For Round, Solid | RJ45 |
| 300668EZ | 8P8C EZ-RJ45 Category 6 Plug NEW |
|
|
s
s
s
s
|
EZ-RJ45 ™ ** Now also available in CAT 6 and EZ-RJ12 ™ ** |
| The new patented EZ-RJ45™ (300568EZ) connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to maintain Category Five, and even enhanced Category Five
capabilities. (50 u in. gold) Can be used on
solid or stranded conductor. The EZ-RJ45™ can be crimped with most any standard tool, then trimmed with a cutter or small utility knife. However, the new BD45000 crimp tool crimps and trims the exposed conductors in one operation. The vertical action of the crimper makes a uniform and positive crimp. |
|
 |
BD45000 Crimp & Trim Tool Replacment Blades (2 Pack) BD45000BL NEW BD45000A for EZ-RJ12 and EZ-RJ45 |
|
|
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111 Back to Part Search 20 |