Specifications for BNC Connectors

BNC style connectors are miniature, light-weight, weatherproof interconnecting devices characterized by their two-stud, quick disconnect bayonet lock coupling arrangement. Their design functions satisfactorily from DC to 11 GHz in static applications, or from DC to 4GHz in applications involving vibration. The connectors typically yield a low VSWR (reflected signal) to 4GHz. Primary applications include radio telecommunications, broadcast equipment, medical equipment, computer, Precision Video, High definition studio broadcast, video switching and test instrumentation where frequent coupling and de-coupling are necessary. Bomar’s  BNCs are available in an extensive variety of configurations and cable sizes and are impedance matched to either 50 ohm or 75 ohm.

MATERIALS

Connector Parts Material Equivalent Standard
  Connector Body and Parts   Brass   ISOCuZn38Pb2 Body Part
  Male Contact Pin   Brass   QQ-B-626
  Commercial Grade   Zinc Alloy/Brass

--------------

  Outer Contact   Brass   QQ-B-750
  Socket Contact   Beryllium Copper   QQ-C-530 / MIL-H-7199

----------

  Phosphor Copper   CuBe2
  Crimp Ferrule   Annealed Copper   QQ-C-576
  Insulators, Standard Versions   PTFE   L-P403 / BS4271

----------

  Delrin   Grade B
  Rubber Gaskets   Silicone Rubber   ASTM-E1418PSI
  Plating   Nickel (Silver Optional)   MIL-G-45204

ELECTRICAL

Requirement Performance Test † Specification
  Impedance

50W       

75W 

 

  Frequency Range

0-4GHz        

0-1 GHz

------------

  VSWR   1.30 Max.   MIL-C-39012
  RF Insertion Loss   0.2 db Min. at 3 GHz   MIL-C-39012
  RF Leakage   -55 db Min. at 3 GHz   MIL-C-39012
  Test Voltage ( At Sea Level)    1500V rms   MIL-STD-202
  Working Voltage ( At Sea Level )   500V rms   MIL-STD-202
  Insulation Resistance   5000 Meg ohms Min.   MIL-STD-202
  Contact Resistance   3 Milli ohms Max.   MIL-C-39012

Mechanical & Environmental

Requirement Performance Test † Specification
  Durability   500 Insertions & Extractions Min.   MIL-C-39012
  Shock   50 G   MIL-STD-202
  Vibration   20 G from 80-2000 Hz   MIL-STD-202
  Cable Retention (Cable Types)   60 lbs. Minimum Pull Test   MIL-C-39012
  Coupling Nut   60 lbs. Maximum   MIL-C-39012
  Temperature Range   PTFE: -55 to +199 C

------------

  Delrin: -40 to +85 C

------------

  Moisture Resistance   Continuous Test   MIL-STD-202
  Salt Spray   48 Hours   MIL-STD-202
  †Products are made to conform to the Mil standard but are for commercial applications and are not QPL             

FOR TECHNICAL SUPPORT:    PHONE 973-347-4040 / FAX973-347-2111        

   1

-Page1-

-Page2-

BNC 3 Piece Crimp

BNC three piece crimp connectors feature semi-captive contacts that “click” into place assuring perfect installation. Each crimp pin has a vent hole for optional           soldering. Soldering is recommended for all stranded conductors 26 AWG or smaller.

Part Number   (Male)

(I.D.) **

Fig. No.

RG/U Cable

  310A205A   .200 In. Fig. 1   6, 21 AWG Center Conductor
  310A205A18    .200 In. Fig. 1   6 CATV, 18 AWG Center Conductor
  310A205F    .124 In. Fig. 1   58A/U, 58C/U Stranded, 141, Thin PVC
  310A205FS    .124 In. Fig. 1   58/U Solid Conductor
  310A205FV    .125 In. Fig. 2   58/U Thin-Net Plenum
  310A205FV2    .125 In. Fig. 2   Mini 59, RGB Cable (23 AWG)
  310A205FV3     .125 In. Fig. 2   Mini 59, RGB Cable (26 AWG)
  310A204G    .150 In. Fig. 1   59, 62, 210
  310A205G20    .150 In. Fig. 1   RG59 20 AWG Center Cond.
  310A205G23    .150 In. Fig. 1   Belden 8241
  310A205MV    .125 In. Fig. 3   174, 178, 196, Mini RGB Cable  50 W
  310B205MV    .125 In. Fig. 3   174, 178, 196, Mini RGB Cable  75 W
  310A205N    .090 In. Fig. 3   179, 187
  310A205P    .125 In. Fig. 1   223
  310B205Q    .205 In. Fig. 1   Belden 8281 True 75 Ohms
  310A204T    .150 In. Fig. 2   59, 62, Plenum
  310A208W2    .103 In. Fig.1   Mini 59, RGB Cable (26 AWG)
  RoHS compliant   ** crimp shank         
Crimp BNC

Crimp BNC     

                 Fig.1                       Fig.2

Crimp BNC

                                            Fig.3
  Click Here for Connector Dimensions/Stripping Dimensions

 

  

 

 

BNC Twist-On and 2 Piece Crimp

BNC Twist-On connectors are field installable and require no tooling other than a stripping tool for the cable preparation. The center conductor is inserted into Bomar’s unique Posi-Con ™contact, as the connector is twisted onto the cable’s outer jacket.
BNC 2 Piece crimp connectors make use of a fully captivated pin. Just insert the center conductor into the connector body, slide the ferrule over the braid, and apply a single hex-crimp to the ferrule. These connectors are easy to install and reliable and are recommended only for the lower data transmission speeds.

Part Number 

Gender

Fig.
No.

RG/U Cable

  310A405A     Male   Fig. 8   6, Thick net
  310A405F     Male   Fig. 8   58A/U Solid Cond, 141, Thin PVC
  310A405F1     Male   Fig. 8   58/U Solid Cond. -.172"- .178 “
  310A405F2     Male   Fig. 8   58/U Thin Plenum - .158" - .162"
  310A405F3     Male   Fig. 8   Thin Plenum .150"
  310A405G     Male   Fig. 8   59, 62, 210 PVC
  310A405T     Male   Fig. 8   59, 62, 210 Plenum
  320A405F     Female   Fig. 8A   58 Solid (PVC)
  320A405G     Female   Fig. 8A   59, 62, 210 (PVC)
  310X205F     Male   Fig. 6   RG58 (PVC)
  310X205G     Male   Fig. 6   RG59, 62 (PVC)
  320X205F     Female   Fig. 7   RG58 (PVC)
  320X205G     Female   Fig. 7   RG59, 62 (PVC)
  RoHS compliant                                
Twist ON BNC  

Twist on BNC Male

 Fig.8A    

                          Fig.8  

2 piece crimp BNC  

2 piece crimp female BNC

Fig.6                              Fig.7 

 

 

 

 

                           

 s

 s

 

 

 

 

FOR TECHNICAL SUPPORT:    PHONE 973-347-4040 / FAX973-347-2111        

     2

-Page 2-

- Page 3 -

                                            BNC Connectors

BNC Standard Clamp

BNC standard clamp style is a simplified version of the original military clamp style. It is required that the contact be soldered to the center conductor of the cable.

Part 
Number
Gender Fig. No. RG/U Cable
  310A105A  

  Male

9   6
  310A105D     Male 9   11A
  310A105F     Male 9   58, 58A, 58C, 141
  310A105G     Male 9   59, 62, 210
  310A105M     Male 9   174, 188, 316
  320A105F*     Female N/S   58, 58A, 58C, 141
  320A105G*     Female N/S   59, 62, 214
BNC Clamp

                             Figure 9

BNC Clamp
 
   

  RoHS compliant         

BNC Specialty Broadcast Plugs         
Broadcast grade BNC connectors are perfectly matched to 75 ohm impedance’s. The superior plugs are for studio wiring and other broadcast uses. Solid precision machined brass, not die-cast, hold up under the toughest conditions. Here, we are showing the eight most popular but there are many more versions matched to the popular cable manufacturer’s part number.
serial digital BNC

Part Number

Gender

Belden Cable

  SBC1505A     Male   1505A
  SBC1694A     Male   1694A
  SBC1695A     Male   1695A
  SBC1855A     Male   1855A
  SBC7731A     Male   7731A
  SBC8218     Male   8218
  SBC8241     Male   8241
  SBC8281     Male   8281

 

                                                                        

  RoHS compliant          

 

 

s

s

s

s

 

s

 

BNC Bulkhead Jacks
Versions are available for front mounting, (F/M) rear mounting, (R/M) crimp types, bulkhead mount grounded, or bulkhead mount, isolated. (Color-coded available.) These jacks are held into the panel by a hex-nut and lock washer. All units feature nickel plated, brass bodies, and gold phosphor-bronze contacts

Bulkhead crimp BNC

    Bulkhead solder BNC
Figure 13 Figure 14

Bulkhead isolated solder BNC

Bulhead solder isolated BNC

  Figure 15

Figure 16

 

 

 

 

 
Part Number Description

Fig No.

        Hole ID 

Dwg
  321A245A     R/M Crimp, RG6 13 .500
  321A245F     R/M Crimp, RG58 , Thin-net PVC 13 .500
  321A245FV     R/M Crimp, Thin-Net Plenum 13 .500
  321A245G     R/M Crimp, RG59, 62, 210 13 .500
  321A245M     R/M Crimp, RG174, 188, 196, 316 13 .500
  321B245M*     R/M Crimp, RG174, 188, 196, 316 13 .500
  321B245N*     R/M Crimp, RG179, 187 N/S .500
  326A515     F/M Solder (Grounded) 14 .375
  326R515     F/M Solder (Isolated) White Bushing 15 .375
  326R515RD     F/M Solder (Isolated) Red Bushing 16 .375
  326R515GN     F/M Solder (Isolated) Green Bushing 16 .375
  326R515BL     F/M Solder (Isolated) Blue Bushing 16 .375

 

 

 

s

s

s

s

 

  RoHS compliant                 

                                                     

 

 

FOR TECHNICAL SUPPORT:   PHONE 973-347-4040 / FAX 973-347-2111        Back to Index

  3

- Page 4 -

BNC Panel Jacks and Plugs
BNC panel plugs and jacks are of machined brass construction for maximum reliability and quality. All contacts are plated with a minimum of five micro-inches of gold. The square panel types mount on .500 inch centers. The bulkhead type mounts into a .380 “D” shaped panel hole. All connector bodies are bright-nickel plated.
Part Number Description Notations Fig. No.  Dwg.
  316A524C     Male Bulkhead Panel Mount   .380" Mtg. Hole

  19 

  317A507     Male Panel Mount  . 500 Mtg. Hole Centers    20
  321A205F     Female Panel Mount, Crimp   Fits RG58/U Cables    21 ---
  321A205G     Female Panel Mount, Crimp   Fits RG59, 62 , 210    21 ---
  321A205M     Female Panel Mount, Crimp   Fits RG174, 178, 196    21 ---
  327A507     Female Panel Mount, Solder   .500 Mtg. Hole Centers    22 ---
  RoHS compliant            

BNC male panel

BNC panel mount
Figure 19 Figure 20
BNC female panel mount BNC panel mount
Figure 21 Figure 22
BNC PC Board Vertical Jacks
BNC vertical mount jacks are available in straight PC mounts and “through-panel” styles. The “through-panel”, 364 Series, is made in both isolated and grounded versions and are ideal for applications where multiple insertions will require a connector which can endure the stress of higher torque. 
   Part Number

Body Plating or Material

Description

Insul. Mat. Con. Plating "L" Dim Fig. No. Dwg.
  361A514*     Nickel / Brass   Straight PC Mount 50W PTFE Gold .717 26 ---
  361A505*     Nickel / Brass   Straight PC Mount 50 W Delrin Gold .914 27 ---
  361A534*     Nickel / Brass   3 Post PC Mount 50 W Delrin Gold .788 27A
  361A505APF     Nickel/Zinc   4 Post W/ Press Fit Center Pin 50W Delrin Gold .925 27B
  361A705APF     Nickel/Zinc   4 Post W/ Press Fit Center Pin 75W Delrin Gold .925 27B
  364S595     White Valox   PC Mount, Thru-Panel,   50 W  Delrin Gold 1.36 23
  364S595B     Black Valox   PC Mount, Thru-Panel,   50 W Delrin Gold 1.36 24
  364S595M     Nickel/Zinc   PC Mount, Thru-Panel,   50 W Delrin Gold 1.36 25
  364S795*     White Valox   PC Mount, Thru-Panel,    75 W Delrin Gold 1.36 23
  364S795B*     Black Valox   PC Mount, Thru-Panel,    75 W Delrin Gold 1.36 24
  364S795M*     Nickel/Zinc   PC Mount, Thru-Panel,    75 W Delrin Gold 1.3 25
  RoHS compliant reflow or wave solder       RoHS compliant  wave solder only           
BNC Vertical Isolated BNC BNC Vertical isolated BNC black

BNC Vertical Metal

             Fig. 23                          Fig. 24                    Fig. 25

 s
 s
 s
 s
BNC vertical pressfit

Fig. 26

The press-fit center pin locks the connector into the PC board so it is held firmly for reflow or wave soldering.
 

Fig. 27B

 

Fig. 27A

* Denotes that items are not popular and may require a special minimum quantity requirement.

________________________

FOR TECHNICAL SUPPORT:     PHONE 973-347-4040 / FAX 973-347-2111      

   4

- Page 4 -

- Page 5 -

                                           BNC Connectors

BNC PC Board Right Angle JacksX
These BNC jacks are manufactured to the highest standards to assure stability in maintaining impedance matching at 50 ohm and 75 ohm applications. The 50 ohm versions have been approved by most of the U.S. manufacturers of LAN cards, and the 75 ohm is in wide use in High Definition Video applications which require the use of a True 75 ohm connector. Contacts are phosphor bronze and will remain resilient even after hundreds of insertions.

 

 

Part Number

Body Material

Description Imp. Height F.M.S. Contact Plating Fig. No. Dwg.
  364M095

Nickel/Zinc  

  4 Post Low Profile, Metal  50W .453 Gold 38
  364M0975    Nickel /Zinc   4 Post Low Profile, Metal   75W .453 Gold 38
  364A595   White Valox   Standard Profile W/ Posts    50W .610 Gold 28
  364A595T   White Valox   Standard Profile W/ Posts (TPX)   50W .610 Gold 28
  364A595NP*   White Valox   Standard Profile WO Posts   50W .610 Gold 35
  364A595NPT*   White Valox   Standard Profile WO Posts (TPX)    50W .610 Gold 35
  364A595B   Black Valox   Standard Profile W/ Posts    50W .610 Gold 30
  364A595BT   Black Valox   Standard Profile W/ Posts (TPX)   50W .610 Gold 30
  364A595BNP*   Black Valox   Standard Profile WO Posts    50W .610 Gold 35
  364A595BNPT*   Black Valox   Standard Profile WO Posts (TPX)   50W .610 Gold 35
  364A595BL   White Valox   Lo Profile W/ Posts    50W .515 Gold 29
  364A595BLT   White Valox   Lo Profile W/ Posts (TPX)   50W .515 Gold 29
  364A595BLNP*   White Valox   Lo-Profile W/O Posts  50W .515 Gold 34
  364A595BLB   Black Valox   Lo-Profile W/ Posts   50W .515 Gold 31
  364A595BLBT   Black Valox   Lo-Profile W/ Posts (TPX)    50W .515 Gold 31
  364A595BLBNP*   Black Valox   Lo-Profile W/O Posts    50W .515 Gold 34
  364M595   Nickel /Zinc   Standard Profile W/ Posts  50W .620 Gold 32
  364M595T   Nickel /Zinc   Standard Profile W/ Posts (TPX)   50W .620 Gold 32
  364M595M   Nickel /Zinc   Super Lo-Profile W/ Clips    50W .340 Gold 35A
  364M595MT   Nickel /Zinc   Super Lo-Profile W/ Clips (TPX)   50W .340 Gold 35A
  364M595L   Nickel / Zinc   Lo-Profile W/ Posts   50W .529 Gold 33
  364M595LT   Nickel / Zinc   Lo-Profile W/ Posts (TPX)   50W .529 Gold 33
  364A795   White Valox   Standard Profile W/ Posts (TPX)   75W .610 Gold 28
  364A795T   White Valox   Standard Profile W/ Posts   75W .610 Gold 28
  364A795B   Black Valox   Standard Profile W/ Posts    75W .610 Gold 30
  364A795BT   Black Valox   Standard Profile W/ Posts (TPX)   75W .610 Gold 30
  364A795BL   White Valox   Lo-Profile W/ Posts   75W .515 Gold 29
  364A795BLT   White Valox   Lo-Profile W/ Posts (TPX)   75W .515 Gold 29

  364A795BLB

  Black Valox   Lo-Profile W/ Posts   75W

.515

Gold

31

  364A795BLBT

  Black Valox   Lo-Profile W/ Posts (TPX)   75W

.515

Gold

31

  364M795   Metal   Standard Profile W/ Posts   75W .620 Gold 32
  364M795T   Metal   Standard Profile W/ Posts (TPX)   75W .620 Gold 32
  364M795L   Metal   Lo-Profile W/ Posts   75W .529 Gold 33
  364M795LT   Metal   Lo-Profile W/ Posts (TPX)  75W .529 Gold 33
  364F595BL   White Valox   9400pF 500V Decoupled  50W .515 Gold 36 ---
  364F595BLB   Black Valox   9400 pF 500V Decoupled  50W .515 Gold 37 ---
  364H595BL   White Valox   9400 pF 1500V Decoupled  50W .515 Gold 36 ---
  364H595BLB   Black Valox   9400 pF 1500V Decoupled  50W .515 Gold 37 ---
  364NT   Zinc/Brass   Jam Nut ( 364 Series)

N/A

---- ---- 36N
  364LW   Zinc/ Steel   Lock Washer ( 364Series)

N/A

---- ---- 37N
  364 KNT   Brass/Nickel   Knurled Nut (364 Series)

N/A

---- ---- 38N

 

BNC R/A BNC isolated jack
                   Fig 28 ig.                                  Fig 29
 
BNC R/A isolated PCB
                  Fig. 30                                   Fig. 31
 
BNC R/A metal female
               Fig. 32                                         Fig. 33
 
                   Fig. 34                                   Fig. 35
                      

 Fig. 36  (top)   Fig. 37

  

 

 

      

    RoHS compliant reflow or wave solder       RoHS compliant  wave solder only        

         (TPX) insulator for  re-flow solder


 

Board Clips Are Available In Place of  Posts.  Add Suffix “C

Spear-point clips lock snuggly into the board.

 

 

Hardware
 

Fig. 36N

Fig. 37N

Note: Mounting hardware is optional and must be ordered separately. Hardware is not sold without the connectors.

                                  Fig. 38N  
   

* Denotes that items are not popular and may require a special minimum order quantity.      

_____________________________

FOR TECHNICAL SUPPORT:      PHONE 973-347-4040 / FAX 973-347-2111       

   5

- Page 5 -

     - Page 6 -

BNC V-Bite ® PC Edge Mount
The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge mounts to the board which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB it disperses rotational torque relief to the board and not the solder points. The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other interfaces available.                                                                  ( See “F”, BNC Twin and TNC sections.)
Part Number

Description Imp Contact Fig. No. Dwg.
  361V504ER     BNC Jack W/ PTFE For Reflow Solder 50W Brass./Gold 39A
  361V504ET     BNC Threaded Jack W/ PTFE For Reflow Solder 50W Brass./Gold

 39

 361V504EFT     BNC Threaded Jack W/ PTFE Insulator/Flange 50W Brass./Gold 39B
  361V509E     BNC Jack W/ Polyethylene Insulator 50W

   Brass/Tin

39A
  361V509ET     BNC Threaded Jack W/ Polyethylene Insulator 50W

   Brass/Tin

39

---
  361V704ER     BNC Jack W/ PTFE For Reflow Solder 75W Brass./Gold 39A
  361V704ET     BNC Threaded Jack W/ PTFE For Reflow Solder 75W Brass./Gold

39

  361V704EFT     BNC Threaded Jack W/ PTFE Insulator/Flange 75W Brass./Gold 39B
  361V709E     BNC Jack W/ Polyethylene Insulator 75W Brass/Gold 39A ---
  361V709ET     BNC Threaded Jack W/ Polyethylene Insulator 75W Brass./Gold

39

---
  361KNT     Knurled Nut (361 Series) NA ---   ---
  3M61V704     Mini- BNC Jack W/ PTFE for Reflow Solder 75W Brass./Gold 39C
  RoHS compliant reflow or wave solder       RoHS compliant  wave solder only      

 

 

BNC V-Bite end launch
Low Profile .270 High FMS
Anti Rotational
VSWR 1.15:1
Patented V-Bite® Snaps Into PCB
Surface Mount Center Contact
Pick & Place Version Available

 

 

         Fig. 39 

                  Fig.39A 

Fig.39B

  Fig. 39C

 

s

s

BNC Reduced Size PCB Right Angle Mount
The Super Low™ Profile BNC PC jack reduces the amount of board space needed to mount a PC jack. Board clips hold the unit in place for soldering. The smallest, lowest profile right angle BNC jack available.
The Lo-Deco™ features a four post design that offers greater stability after wave soldering. Also featured is a gold plated contact and nickel plated cast zinc body. Smooth, sleek and aesthetically pleasing design is tumbled to remove casting lines.
Part Number Description Imp. Contact Fig. No. Dwg.
  364M595M     BNC Super Low Profile Jack    50W Phos./Gold   35A
  364M595MT     BNC Super Low Profile Jack    50W Phos./Gold   35A
  364M795M      BNC Super Low Profile Jack    75W Phos./Gold   35A
  364M795MT     BNC Super Low Profile Jack    75W Phos./Gold   35A
  364M095     BNC Lo-Deco Jack   50W Phos./Gold   38
  364M0975     BNC Lo-Deco Jack   75W Phos./Gold   38

  RoHS compliant reflow or wave solder       RoHS compliant  wave solder only                                  

BNC super low profile BNC 

.
Fig 35A PC Layout for Super Low Profile
BNC low profile BNC

                                  Fig. 38

 

*Denotes that items are not popular and may require a special minimum order quantity.

________________________

        FOR TECHNICAL SUPPORT:   PHONE 973-347-4040 / FAX 973-347-2111         

   6

- Page 6 -

- Page 7 -

BNC Connectors

BNC Dual PC Jacks (Threaded)

Right Angle or Vertical Stacked: When board space becomes a serious issue and you still need the robust, full size, BNC connectors, a dual stacked right angle or vertical version will do the trick. Assembly insertion time is cut in half as well. The Dual 364 series is available in both Valox isolated and all metal construction.

(shown with closed back option FS)

Dual BNC

                        Fig. 38A                                                            Fig. 38B

dual BNC vertical

dual mini BNC

                           Fig. 40D                                      Fig. 38C

knurled nut tool

   Fig. 38D                                      Fig. 38E

   

  Right Angle

              
Part Number Description Imp. Contact Fig.No. Dwg.
  364A2595   Dual Right Angle, White Valox  50W Phos./Gold   38A
  364A2595T   Dual Right Angle, White Valox (TPX) 50W Phos./Gold   38A
  364A2795   Dual Right Angle, White Valox  75W Phos./Gold   38A
  364A2795T   Dual Right Angle, White Valox (TPX) 75W Phos./Gold   38A
  364A2595B   Dual Right Angle, Black Valox  50W Phos./Gold   38A
  364A2795B   Dual Right Angle, Black Valox  75W Phos./Gold   38A
  364M2595   Dual Right Angle, Metal  50W Phos./Gold   38B
  364M2595T   Dual Right Angle, Metal  (TPX) 50W Phos./Gold   38B
  364M2795   Dual Right Angle, Metal  75W Phos./Gold   38B
  364M2795T   Dual Right Angle, Metal  (TPX) 75W Phos./Gold   38B
  3M64M2795   Dual Right Angle, Metal Mini-BNC 75W Phos-Gold   38C
  364KNT Knurled Nut for Dual BNC  N/A Brass/Nickel

  38D

 

 

 Vertical

       

Part Number

Description

Imp. Contact Fig.No.
  364S2595   Dual Vertical, White Valox 50W Phos./Gold   40D
  364S2795   Dual Vertical, White Valox 75W Phos./Gold   40D
  364S2595B   Dual Vertical, Black Valox 50W Phos./Gold   40D
  364S2795B   Dual Vertical, Black Valox 75W Phos./Gold   40D
  364S2595M   Dual Vertical, Metal 50W Phos./Gold ----

 364S2795M

  Dual Vertical, Metal 75W Phos./Gold ----
   

Tool

       

Part Number

Description

Imp. Contact Fig.No.
  BD36400 -   Hex Shafted Tool for Knurled Nut N/A Steel/Nickel  38E

  RoHS compliant reflow or wave solder       RoHS compliant  wave solder only                                      

Note:Hardware is optional and  must be ordered separately

        

BNC Multi-Port PC Jacks (Non-Threaded)

Side By Side: These right angle units are available in dual or quad configurations. These units are not threaded for panel installation using a jam nut. Up one fourth the installation time. 

Part Number Description Imp. Contact Fig. No.
  365A2595   Dual Right Angle, Side By Side White Valox  50W Phos./Gold 38B
  365A2795   Dual Right Angle, Side By Side White Valox  75W Phos./Gold 38B
  365A2595B   Dual Right Angle, Side By Side Black Valox  50W Phos./Gold 38B
  365A2795B   Dual Right Angle, Side By Side Black Valox  75W Phos./Gold 38B
  365A4595   Quad Right Angle, Side By Side White Valox 50W Phos./Gold NS
  365A4795   Quad Right Angle, Side By Side White Valox 75W Phos./Gold. NS
  365A4595B   Quad Right Angle, Side By Side Black Valox 50W Phos./Gold NS
  365A4795B   Quad Right Angle, Side By Side Black Valox 75W Phos./Gold NS

  RoHS compliant reflow or wave solder       RoHS compliant  wave solder only                                               

BNC multiport horizontal                                        Fig.38B               

________________________

          FOR TECHNICAL SUPPORT:  PHONE 973-347-4040 / FAX 973-347-2111        

   7

- Page 7 -

- Page 8 -

 

               - Page 9 -

BNC Adapters
These sturdy within-series BNC adapters are available in all standard designs. Additionally, several unique constructions compliment the product group and allow adaptations for every conceivable application. All connector bodies are plated with bright nickel. Male contacts are brass, female contacts are phosphor bronze. All contacts are plated with 5 micro inches of gold. 
Part    Number Description Fig. No.
  330A505    Male/ Male Inline Barrel Splice 35
  332A505    Female/Female Inline Splice 36
  335A544    Female/Female Inline Bulkhead Mount (Grounded) 37
  335R544    Female/Female Inline Isolated Bulkhead (Metal Outer Thread) 37
  343A205F    Crimp “T” Adapter for RG58 Cable 41
  343A205G    Crimp “T” Adapter for RG59, 62 Cables 41
  343A505    Female/Male/Female “T” Adapter (Yes, it runs with Netware™ ) 38
  345A505    Female/Female/Female “T” Adapter 39
  351A505    Female/Male Right Angle Adapter 40
  383U505    The Goalie™  42
  383U205F    The Goalie Brute™ Crimp Version for RG58 Cable 45
  383U205G    The Goalie Brute™ Crimp Version for RG59, 62 Cables 45
  383K505*    The Goalie Brute™  43
  383P505*    The Insulated Goalie  44
  353U205F*    Male/Female/Female Right Angle Double-Down™Crimp  for RG58 49
  353U205G*    Male/Female/Female Right Angle Double-Down™ Type for RG59 49
  353U505*    Male/Female/Female Right Angle Double-Down™ 48
  393U205F*    Male/Female/Female Straight Double-Down™Crimp  for RG58 47
  393U205G*    Male/Female/Female Straight Double-Down™Crimp  for RG59 47
  393U505*    Male/Female/Female Straight Double-Down™ 46
  RoHS compliant                                               
BNC T adapter

 

 

 

 

                   Fig. 38 

      

Fig. 39

BNC right angle adapter     Fig. 40

  Fig. 42

  Fig. 43

  Fig.44

 

 

 

 

 

 

 

 

 

 

 

 

 

            

               Fig. 35                                        Fig. 36

Fig. 37 Fig. 48 Fig. 46
                       
                                        Fig. 41                                              Fig. 49             Fig. 45                   Fig. 47
Specialty LAN Adapters
Double Down™ adapters are designed to allow parallel cables entering a patch panel, or a BNC LAN terminal port to be guided at a right angle to the input jack. Two versions accomplish this: one is a right angle with side-by-side jacks for areas with little rear clearance, and the other is a straight version for installations where width between panel jacks in limited. Crimp types are for permanent installations. Goalie, and Goalie Brute allow parallel cable 90° entry which require a minimum of rotational cable space.

*Minimum quantity Requirements May Apply - Contact Sales

________________________

         FOR TECHNICAL SUPPORT:   PHONE 973-347-4040 / FAX 973-347-2111         

   9

- Page 9 -

         - Page 10 -

BNC Connectors

BNC Terminators
BNC terminators are available in standard 1% tolerance versions and in the economy 5% tolerance styles. The standard types have removable color coded caps for easy identification. The economy type are color coded as well but caps are not removable.
Part Number Description Fig. No.
  310X054A   50 W with Red Cap 50
  310C054   50 W with Grounding Chain 51
  310X074   75 W with Blue Cap 50
  HBC310X075   75 W Precision .1% Tolerance 52
  310X094   93 W with Yellow Cap 50
  HBC310X075   75 W Precision .1% Tolerance 53
  EJ175   50 W Economy N/S
  EJ177   75 W Economy N/S
  EJ179   93 W Economy N/S
  RoHS compliant           

     BNC Terminator

Fig. 50

                    Fig. 51

                             

 

                                           Fig. 52

s

s

s

ss

    FOR TECHNICAL SUPPORT:    PHONE 973-347-4040 / FAX 973-347-2111           

 10

- Page 10 -   

Coax Crimp Tools
Professional grade hex-crimp tools for coaxial connectors are available in ratchet  and non-ratcheting types, both provide dependable service. Ratchet tools feature replaceable dies. Included is a convenient release mechanism to unlatch the ratchet in the event of an improper crimp. Each too also crimps the contact pin to the conductor.
Part Number Description

  BD10100

  Hex Crimp Ratchet for "F" Types, RG59, RG6

  BDHD100

  Hex Crimp Ratchet for Belden 8281

  BDHD200

  Hex Crimp Ratchet for BNC/TNC RG58,59,62 and MV 

  BDHD100

  Hex Crimp Ratchet for Mini-RG59

  BD11012

  Hex Crimp Ratchet for "N" Crimp RG11, RG213, RG214

  BDHD100

  Hex Crimp Ratchet for BNC/TNC RG6, RG59

     

- Page 11 -

 

s