BNC Connectors

Specifications Connector Body Brass Male Contact Pin Brass QQ-B-626 Commercial Grade Zinc Alloy/Brass-------------- Outer Contact Brass QQ-B-750 Socket Contact Beryllium Copper QQ-C-530 / MIL-H-7199---------- Phosphor Copper CuBe2 Crimp Ferrule Annealed Copper QQ-C-576 Insulators, Standard Teflon L-P403 / BS4271 ---------- Delrin Grade B Rubber Gaskets Silicone Rubber ASTM-E1418PSI Plating Nickel (Silver Optional) MIL-G-45204

Impedance50W

BNC style connectors are miniature, light-weight, weatherproof interconnecting devices characterized by their two-stud, quick disconnect bayonet lock coupling arrangement. Their design functions satisfactorily from DC to 11 GHz in static applications, or from DC to 4GHz in applications involving vibration. The connectors typically yield a low VSWR (reflected signal) to 4GHz. Primary applications include radio telecommunications, broadcast equipment, medical equipment, computer, Precision Video, High definition studio broadcast, video switching and test instrumentation where frequent coupling and de-coupling are necessary. Bomar’s BNCs are available in an extensive variety of configurations and cable sizes and are impedance matched to either 50 ohm or 75 ohm.

bordercolordark="#808080" bordercolor="#CE9AFF" bgcolor="#CE9AFF">

MATERIALS

Connector Parts Material Equivalent Standard

and Parts ISOCuZn38Pb2 Body Part

Versions

bgcolor="#CE9AFF" bordercolorlight="#C0C0C0" bordercolordark="#808080">

ELECTRICAL

bordercolor="#808080" cellspacing="0"> Requirement Performance Test † Specification

color="#FF0000">

75W

Frequency Range

0-4GHz

0-1 GHz

------------ VSWR 1.30 Max. MIL-C-39012 RF Insertion Loss 0.2 db Min. at 3 GHz MIL-C-39012 RF Leakage -55 db Min. at 3 GHz MIL-C-39012 Test Voltage ( At Sea Level) 1500V rms MIL-STD-202 Working Voltage ( At Sea Level ) 500V rms MIL-STD-202 Insulation Resistance 5000 Meg ohms Min. MIL-STD-202 Contact Resistance 3 Milli ohms Max. MIL-C-39012

Mechanical & Environmental

Requirement	Performance	Test † Specification
Durability	500 Insertions & Extractions Min.	MIL-C-39012
Shock	50 G	MIL-STD-202
Vibration	20 G from 80-2000 Hz	MIL-STD-202
Cable Retention (Cable Types)	60 lbs. Minimum Pull Test	MIL-C-39012
Coupling Nut	60 lbs. Maximum	MIL-C-39012
Temperature Range	Teflon: -55 to +199 C	------------
Temperature Range	Delrin: -40 to +85 C	------------
Moisture Resistance	Continuous Test	MIL-STD-202
Salt Spray	48 Hours	MIL-STD-202

†Products are made to conform to the Mil standard but are for commercial applications and are not QPL

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111 Back to Index

-Page1-

-Page2-

3 Piece Crimp

BNC three piece crimp connectors feature semi-captive contacts that “click” into place assuring perfect installation. Each crimp pin has a vent hole for optional soldering. Soldering is recommended for all stranded conductors 26 AWG or smaller.

Part Number (Male)	(I.D.) **	Fig. No.	RG/U Cable
310A205A	.200 In.	Fig. 1	6, 21 AWG Center Conductor
310A205A18	.200 In.	Fig. 1	6 CATV, 18 AWG Center Conductor
310A205F	.124 In.	Fig. 1	58A/U, 58C/U Stranded, 141, Thin PVC
310A205FS	.124 In.	Fig. 1	58/U Solid Conductor
310A205FV	.125 In.	Fig. 2	58/U Thin-Net Plenum
310A205FV2	.125 In.	Fig. 2	Mini 59, RGB Cable (23 AWG)
310A205FV3	.125 In.	Fig. 2	Mini 59, RGB Cable (26 AWG)
310A204G	.150 In.	Fig. 1	59, 62, 210
310A205G20	.150 In.	Fig. 1	RG59 20 AWG Center Cond.
310A205G23	.150 In.	Fig. 1	Belden 8241
310A205MV	.125 In.	Fig. 3	174, 178, 196, Mini RGB Cable 50 W
310B205MV	.125 In.	Fig. 3	174, 178, 196, Mini RGB Cable 75 W
310A205N	.090 In.	Fig. 3	179, 187
310A205P	.125 In.	Fig. 1	223
310B205Q	.205 In.	Fig. 1	Belden 8281 True 75 Ohms
310A204T	.150 In.	Fig. 2	59, 62, Plenum
310A208W2	.103 In.	Fig.1	Mini 59, RGB Cable (26 AWG)
RoHS compliant ** crimp shank


Fig.1	Fig.2

Fig.3

	Click Here for Connector Dimensions/Stripping Dimensions

Twist-On and 2 Piece Crimp

BNC Twist-On connectors are field installable and require no tooling other than a stripping tool for the cable preparation. The center conductor is inserted into Bomar’s unique Posi-Con ™contact, as the connector is twisted onto the cable’s outer jacket.
BNC 2 Piece crimp connectors make use of a fully captivated pin. Just insert the center conductor into the connector body, slide the ferrule over the braid, and apply a single hex-crimp to the ferrule. These connectors are easy to install and reliable and are recommended only for the lower data transmission speeds.

Part Number	Gender	Fig. No.	RG/U Cable
310A405A	Male	Fig. 8	6, Thick net
310A405F	Male	Fig. 8	58A/U Solid Cond, 141, Thin PVC
310A405F1	Male	Fig. 8	58/U Solid Cond. -.172"- .178 “
310A405F2	Male	Fig. 8	58/U Thin Plenum - .158" - .162"
310A405F3	Male	Fig. 8	Thin Plenum .150"
310A405G	Male	Fig. 8	59, 62, 210 PVC
310A405T	Male	Fig. 8	59, 62, 210 Plenum
320A405F	Female	Fig. 8A	58 Solid (PVC)
320A405G	Female	Fig. 8A	59, 62, 210 (PVC)
310X205F	Male	Fig. 6	RG58 (PVC)
310X205G	Male	Fig. 6	RG59, 62 (PVC)
320X205F	Female	Fig. 7	RG58 (PVC)
320X205G	Female	Fig. 7	RG59, 62 (PVC)
RoHS compliant


Fig.8A		Fig.8

Fig.6		Fig.7

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111 Back to Index

-Page 2-

- Page 3 -

BNC Connectors

Standard Clamp

BNC standard clamp style is a simplified version of the original military clamp style. It is required that the contact be soldered to the center conductor of the cable.

Part Number	Gender	Fig. No.	RG/U Cable
310A105A	Male	9	6
310A105D	Male	9	11A
310A105F	Male	9	58, 58A, 58C, 141
310A105G	Male	9	59, 62, 210
310A105M	Male	9	174, 188, 316
320A105F*	Female	N/S	58, 58A, 58C, 141
320A105G*	Female	N/S	59, 62, 214


Figure 9

RoHS compliant

Specialty Broadcast Plugs Click here for complete Broadcast Catalog

Broadcast grade BNC connectors are perfectly matched to 75 ohm impedance’s. The superior plugs are for studio wiring and other broadcast uses. Solid precision machined brass, not die-cast, hold up under the toughest conditions. Here, we are showing the eight most popular but there are many more versions matched to the popular cable manufacturer’s part number.

Part Number	Gender	Belden Cable
SBC1505A	Male	1505A
SBC1694A	Male	1694A
SBC1695A	Male	1695A
SBC1855A	Male	1855A
SBC7731A	Male	7731A
SBC8218	Male	8218
SBC8241	Male	8241
SBC8281	Male	8281

RoHS compliant

Bulkhead Jacks

Versions are available for front mounting, (F/M) rear mounting, (R/M) crimp types, bulkhead mount grounded, or bulkhead mount, isolated. (Color-coded available.) These jacks are held into the panel by a hex-nut and lock washer. All units feature nickel plated, brass bodies, and gold phosphor-bronze contacts



Figure 13	Figure 14

Figure 15	Figure 16

Part Number	Description	Fig No.	Hole ID	Dwg
321A245A	R/M Crimp, RG6	13	.500
321A245F	R/M Crimp, RG58 , Thin-net PVC	13	.500
321A245FV	R/M Crimp, Thin-Net Plenum	13	.500
321A245G	R/M Crimp, RG59, 62, 210	13	.500
321A245M	R/M Crimp, RG174, 188, 196, 316	13	.500
321B245M*	R/M Crimp, RG174, 188, 196, 316	13	.500
321B245N*	R/M Crimp, RG179, 187	N/S	.500
326A515	F/M Solder (Grounded)	14	.375
326R515	F/M Solder (Isolated) White Bushing	15	.375
326R515RD	F/M Solder (Isolated) Red Bushing	16	.375
326R515GN	F/M Solder (Isolated) Green Bushing	16	.375
326R515BL	F/M Solder (Isolated) Blue Bushing	16	.375

RoHS compliant

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 4 -

Panel Jacks and Plugs

BNC panel plugs and jacks are of machined brass construction for maximum reliability and quality. All contacts are plated with a minimum of five micro-inches of gold. The square panel types mount on .500 inch centers. The bulkhead type mounts into a .380 “D” shaped panel hole. All connector bodies are bright-nickel plated.

Part Number	Description	Notations	Fig. No.	Dwg.
316A524C	Male Bulkhead Panel Mount	.380" Mtg. Hole	19
317A507	Male Panel Mount	. 500 Mtg. Hole Centers	20
321A205F	Female Panel Mount, Crimp	Fits RG58/U Cables	21	---
321A205G	Female Panel Mount, Crimp	Fits RG59, 62 , 210	21	---
321A205M	Female Panel Mount, Crimp	Fits RG174, 178, 196	21	---
327A507	Female Panel Mount, Solder	.500 Mtg. Hole Centers	22	---
RoHS compliant


Figure 19	Figure 20

Figure 21	Figure 22

PC Board Vertical Jacks

BNC vertical mount jacks are available in straight PC mounts and “through-panel” styles. The “through-panel”, 364 Series, is made in both isolated and grounded versions and are ideal for applications where multiple insertions will require a connector which can endure the stress of higher torque.

Part Number	Body Plating or Material	Description	Insul. Mat.	Con. Plating	"L" Dim	Fig. No.	Dwg.
361A514*	Nickel / Brass	Straight PC Mount 50W	Teflon	Gold	.717	26	---
361A505*	Nickel / Brass	Straight PC Mount 50 W	Delrin	Gold	.914	27	---
361A534*	Nickel / Brass	3 Post PC Mount 50 W	Delrin	Gold	.788	27A
361A505APF	Nickel/Zinc	4 Post W/ Press Fit Center Pin 50W	Delrin	Gold	.925	27B
361A705APF	Nickel/Zinc	4 Post W/ Press Fit Center Pin 75W	Delrin	Gold	.925	27B
364S595	White Valox	PC Mount, Thru-Panel, 50 W	Delrin	Gold	1.36	23
364S595B	Black Valox	PC Mount, Thru-Panel, 50 W	Delrin	Gold	1.36	24
364S595M	Nickel/Zinc	PC Mount, Thru-Panel, 50 W	Delrin	Gold	1.36	25
364S795*	White Valox	PC Mount, Thru-Panel, 75 W	Delrin	Gold	1.36	23
364S795B*	Black Valox	PC Mount, Thru-Panel, 75 W	Delrin	Gold	1.36	24
364S795M*	Nickel/Zinc	PC Mount, Thru-Panel, 75 W	Delrin	Gold	1.3	25
RoHS compliant reflow or wave solder RoHS compliant wave solder only

Fig. 23 Fig. 24 Fig. 25


Fig. 26	The press-fit center pin locks the connector into the PC board so it is held firmly for reflow or wave soldering.

Fig. 27B

Fig. 27A	* Denotes that items are not popular and may require a special minimum quantity requirement.

________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 4 -

- Page 5 -

BNC Connectors

PC Board Right Angle JacksX

These BNC jacks are manufactured to the highest standards to assure stability in maintaining impedance matching at 50 ohm and 75 ohm applications. The 50 ohm versions have been approved by most of the U.S. manufacturers of LAN cards, and the 75 ohm is in wide use in High Definition Video applications which require the use of a True 75 ohm connector. Contacts are phosphor bronze and will remain resilient even after hundreds of insertions.

Part Number	Body Material	Description	Imp.	Height F.M.S.	Contact Plating	Fig. No.	Dwg.
364M095	Nickel/Zinc	4 Post Low Profile, Metal	50W	.453	Gold	38
364M0975	Nickel /Zinc	4 Post Low Profile, Metal	75W	.453	Gold	38
364A595	White Valox	Standard Profile W/ Posts	50W	.610	Gold	28
364A595T	White Valox	Standard Profile W/ Posts (TPX)	50W	.610	Gold	28
364A595NP*	White Valox	Standard Profile WO Posts	50W	.610	Gold	35
364A595NPT*	White Valox	Standard Profile WO Posts (TPX)	50W	.610	Gold	35
364A595B	Black Valox	Standard Profile W/ Posts	50W	.610	Gold	30
364A595BT	Black Valox	Standard Profile W/ Posts (TPX)	50W	.610	Gold	30
364A595BNP*	Black Valox	Standard Profile WO Posts	50W	.610	Gold	35
364A595BNPT*	Black Valox	Standard Profile WO Posts (TPX)	50W	.610	Gold	35
364A595BL	White Valox	Lo Profile W/ Posts	50W	.515	Gold	29
364A595BLT	White Valox	Lo Profile W/ Posts (TPX)	50W	.515	Gold	29
364A595BLNP*	White Valox	Lo-Profile W/O Posts	50W	.515	Gold	34
364A595BLB	Black Valox	Lo-Profile W/ Posts	50W	.515	Gold	31
364A595BLBT	Black Valox	Lo-Profile W/ Posts (TPX)	50W	.515	Gold	31
364A595BLBNP*	Black Valox	Lo-Profile W/O Posts	50W	.515	Gold	34
364M595	Nickel /Zinc	Standard Profile W/ Posts	50W	.620	Gold	32
364M595T	Nickel /Zinc	Standard Profile W/ Posts (TPX)	50W	.620	Gold	32
364M595M	Nickel /Zinc	Super Lo-Profile W/ Clips	50W	.340	Gold	35A
364M595MT	Nickel /Zinc	Super Lo-Profile W/ Clips (TPX)	50W	.340	Gold	35A
364M595L	Nickel / Zinc	Lo-Profile W/ Posts	50W	.529	Gold	33
364M595LT	Nickel / Zinc	Lo-Profile W/ Posts (TPX)	50W	.529	Gold	33
364A795	White Valox	Standard Profile W/ Posts (TPX)	75W	.610	Gold	28
364A795T	White Valox	Standard Profile W/ Posts	75W	.610	Gold	28
364A795B	Black Valox	Standard Profile W/ Posts	75W	.610	Gold	30
364A795BT	Black Valox	Standard Profile W/ Posts (TPX)	75W	.610	Gold	30
364A795BL	White Valox	Lo-Profile W/ Posts	75W	.515	Gold	29
364A795BLT	White Valox	Lo-Profile W/ Posts (TPX)	75W	.515	Gold	29
364A795BLB	Black Valox	Lo-Profile W/ Posts	75W	.515	Gold	31
364A795BLBT	Black Valox	Lo-Profile W/ Posts (TPX)	75W	.515	Gold	31
364M795	Metal	Standard Profile W/ Posts	75W	.620	Gold	32
364M795T	Metal	Standard Profile W/ Posts (TPX)	75W	.620	Gold	32
364M795L	Metal	Lo-Profile W/ Posts	75W	.529	Gold	33
364M795LT	Metal	Lo-Profile W/ Posts (TPX)	75W	.529	Gold	33
364F595BL	White Valox	9400pF 500V Decoupled	50W	.515	Gold	36	---
364F595BLB	Black Valox	9400 pF 500V Decoupled	50W	.515	Gold	37	---
364H595BL	White Valox	9400 pF 1500V Decoupled	50W	.515	Gold	36	---
364H595BLB	Black Valox	9400 pF 1500V Decoupled	50W	.515	Gold	37	---
364NT	Zinc/Brass	Jam Nut ( 364 Series)	N/A	----	----	36N
364LW	Zinc/ Steel	Lock Washer ( 364Series)	N/A	----	----	37N
364 KNT	Brass/Nickel	Knurled Nut (364 Series)	N/A	----	----	38N

Fig 28 ig. Fig 29

Fig. 30 Fig. 31

Fig. 32 Fig. 33

Fig. 34 Fig. 35

Fig. 36 (top) Fig. 37

RoHS compliant reflow or wave solder RoHS compliant wave solder only

(TPX) insulator for re-flow solder

Board Clips Are Available In Place of Posts. Add Suffix “C”

Spear-point clips lock snuggly into the board.

Hardware

	Fig. 36N	Fig. 37N
Note: Mounting hardware is optional and must be ordered separately. Hardware is not sold without the connectors.
	Fig. 38N

* Denotes that items are not popular and may require a special minimum order quantity.

_____________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 5 -

- Page 6 -

V-Bite ® PC Edge Mount

The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge mounts to the board which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB it disperses rotational torque relief to the board and not the solder points. The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other interfaces available. ( See “F”, BNC Twin and TNC sections.)

Part Number	Description	Imp	Contact	Fig. No.	Dwg.
361V504ER	BNC Jack W/ Teflon For Reflow Solder	50W	Brass./Gold	39A
361V504ET	BNC Threaded Jack W/ Teflon For Reflow Solder	50W	Brass./Gold	39
361V504EFT	BNC Threaded Jack W/ Teflon Insulator/Flange	50W	Brass./Gold	39B
361V509E	BNC Jack W/ Polyethylene Insulator	50W	Brass/Tin	39A
361V509ET	BNC Threaded Jack W/ Polyethylene Insulator	50W	Brass/Tin	39	---
361V704ER	BNC Jack W/ Teflon For Reflow Solder	75W	Brass./Gold	39A
361V704ET	BNC Threaded Jack W/ Teflon For Reflow Solder	75W	Brass./Gold	39
361V704EFT	BNC Threaded Jack W/ Teflon Insulator/Flange	75W	Brass./Gold	39B
361V709E	BNC Jack W/ Polyethylene Insulator	75W	Brass/Gold	39A	---
361V709ET	BNC Threaded Jack W/ Polyethylene Insulator	75W	Brass./Gold	39	---
361KNT	Knurled Nut (361 Series)	NA	---	---
3M61V704	Mini- BNC Jack W/ Teflon for Reflow Solder	75W	Brass./Gold	39C
RoHS compliant reflow or wave solder RoHS compliant wave solder only

Low Profile .270 High FMS

Anti Rotational

VSWR 1.15:1

Patented V-Bite® Snaps Into PCB

Surface Mount Center Contact

Pick & Place Version Available


Fig. 39	Fig.39A	Fig.39B	Fig. 39C

Reduced Size PCB Right Angle Mount

The Super Low™ Profile BNC PC jack reduces the amount of board space needed to mount a PC jack. Board clips hold the unit in place for soldering. The smallest, lowest profile right angle BNC jack available.
The Lo-Deco™ features a four post design that offers greater stability after wave soldering. Also featured is a gold plated contact and nickel plated cast zinc body. Smooth, sleek and aesthetically pleasing design is tumbled to remove casting lines.

Part Number	Description	Imp.	Contact	Fig. No.	Dwg.
364M595M	BNC Super Low Profile Jack	50W	Phos./Gold	35A
364M595MT	BNC Super Low Profile Jack	50W	Phos./Gold	35A
364M795M	BNC Super Low Profile Jack	75W	Phos./Gold	35A
364M795MT	BNC Super Low Profile Jack	75W	Phos./Gold	35A
364M095	BNC Lo-Deco Jack	50W	Phos./Gold	38
364M0975	BNC Lo-Deco Jack	75W	Phos./Gold	38
RoHS compliant reflow or wave solder RoHS compliant wave solder only

	.
Fig 35A	PC Layout for Super Low Profile

Fig. 38

*Denotes that items are not popular and may require a special minimum order quantity.

________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 6 -

- Page 7 -

BNC Connectors

Dual PC Jacks (Threaded)

Right Angle or Vertical Stacked: When board space becomes a serious issue and you still need the robust, full size, BNC connectors, a dual stacked right angle or vertical version will do the trick. Assembly insertion time is cut in half as well. The Dual 364 series is available in both Valox isolated and all metal construction.

(shown with closed back option FS)

Fig. 38A Fig. 38B

Fig. 40D Fig. 38C

Fig. 38D Fig. 38E

		Right Angle
Part Number		Description	Imp.	Contact	Fig.No.	Dwg.
364A2595		Dual Right Angle, White Valox	50W	Phos./Gold	38A
364A2595T		Dual Right Angle, White Valox (TPX)	50W	Phos./Gold	38A
364A2795		Dual Right Angle, White Valox	75W	Phos./Gold	38A
364A2795T		Dual Right Angle, White Valox (TPX)	75W	Phos./Gold	38A
364A2595B		Dual Right Angle, Black Valox	50W	Phos./Gold	38A
364A2795B		Dual Right Angle, Black Valox	75W	Phos./Gold	38A
364M2595		Dual Right Angle, Metal	50W	Phos./Gold	38B
364M2595T		Dual Right Angle, Metal (TPX)	50W	Phos./Gold	38B
364M2795		Dual Right Angle, Metal	75W	Phos./Gold	38B
364M2795T		Dual Right Angle, Metal (TPX)	75W	Phos./Gold	38B
3M64M2795		Dual Right Angle, Metal Mini-BNC	75W	Phos-Gold	38C
364KNT		Knurled Nut for Dual BNC	N/A	Brass/Nickel	38D
		Vertical
Part Number		Description	Imp.	Contact	Fig.No.
364S2595		Dual Vertical, White Valox	50W	Phos./Gold	40D
364S2795		Dual Vertical, White Valox	75W	Phos./Gold	40D
364S2595B		Dual Vertical, Black Valox	50W	Phos./Gold	40D
364S2795B		Dual Vertical, Black Valox	75W	Phos./Gold	40D
364S2595M		Dual Vertical, Metal	50W	Phos./Gold	----
364S2795M		Dual Vertical, Metal	75W	Phos./Gold	----
		Tool
Part Number		Description	Imp.	Contact	Fig.No.
BD36400	-	Hex Shafted Tool for Knurled Nut	N/A	Steel/Nickel	38E
RoHS compliant reflow or wave solder RoHS compliant wave solder only
Note:Hardware is optional and must be ordered separately

Multi-Port PC Jacks (Non-Threaded)

Side By Side: These right angle units are available in dual or quad configurations. These units are not threaded for panel installation using a jam nut. Up one fourth the installation time.

Part Number	Description	Imp.	Contact	Fig. No.
365A2595	Dual Right Angle, Side By Side White Valox	50W	Phos./Gold	38B
365A2795	Dual Right Angle, Side By Side White Valox	75W	Phos./Gold	38B
365A2595B	Dual Right Angle, Side By Side Black Valox	50W	Phos./Gold	38B
365A2795B	Dual Right Angle, Side By Side Black Valox	75W	Phos./Gold	38B
365A4595	Quad Right Angle, Side By Side White Valox	50W	Phos./Gold	NS
365A4795	Quad Right Angle, Side By Side White Valox	75W	Phos./Gold.	NS
365A4595B	Quad Right Angle, Side By Side Black Valox	50W	Phos./Gold	NS
365A4795B	Quad Right Angle, Side By Side Black Valox	75W	Phos./Gold	NS
RoHS compliant reflow or wave solder RoHS compliant wave solder only

BNC multiport horizontal Fig.38B

________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 7 -

- Page 8 -

- Page 9 -

Adapters

These sturdy within-series BNC adapters are available in all standard designs. Additionally, several unique constructions compliment the product group and allow adaptations for every conceivable application. All connector bodies are plated with bright nickel. Male contacts are brass, female contacts are phosphor bronze. All contacts are plated with 5 micro inches of gold.

Part Number	Description	Fig. No.
330A505	Male/ Male Inline Barrel Splice	35
332A505	Female/Female Inline Splice	36
335A544	Female/Female Inline Bulkhead Mount (Grounded)	37
335R544	Female/Female Inline Isolated Bulkhead (Metal Outer Thread)	37
343A205F	Crimp “T” Adapter for RG58 Cable	41
343A205G	Crimp “T” Adapter for RG59, 62 Cables	41
343A505	Female/Male/Female “T” Adapter (Yes, it runs with Netware™ )	38
345A505	Female/Female/Female “T” Adapter	39
351A505	Female/Male Right Angle Adapter	40
383U505	The Goalie™	42
383U205F	The Goalie Brute™ Crimp Version for RG58 Cable	45
383U205G	The Goalie Brute™ Crimp Version for RG59, 62 Cables	45
383K505*	The Goalie Brute™	43
383P505*	The Insulated Goalie	44
353U205F*	Male/Female/Female Right Angle Double-Down™Crimp for RG58	49
353U205G*	Male/Female/Female Right Angle Double-Down™ Type for RG59	49
353U505*	Male/Female/Female Right Angle Double-Down™	48
393U205F*	Male/Female/Female Straight Double-Down™Crimp for RG58	47
393U205G*	Male/Female/Female Straight Double-Down™Crimp for RG59	47
393U505*	Male/Female/Female Straight Double-Down™	46
RoHS compliant

Fig. 38

Fig. 39

BNC right angle adapter Fig. 40

Fig. 42

Fig. 43

Fig.44


Fig. 35 Fig. 36	Fig. 37	Fig. 48	Fig. 46

Fig. 41	Fig. 49	Fig. 45	Fig. 47

Specialty LAN Adapters

Double Down™ adapters are designed to allow parallel cables entering a patch panel, or a BNC LAN terminal port to be guided at a right angle to the input jack. Two versions accomplish this: one is a right angle with side-by-side jacks for areas with little rear clearance, and the other is a straight version for installations where width between panel jacks in limited. Crimp types are for permanent installations. Goalie, and Goalie Brute allow parallel cable 90° entry which require a minimum of rotational cable space.

*Minimum quantity Requirements May Apply - Contact Sales

________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 9 -

- Page 10 -

BNC Connectors

Terminators

BNC terminators are available in standard 1% tolerance versions and in the economy 5% tolerance styles. The standard types have removable color coded caps for easy identification. The economy type are color coded as well but caps are not removable.

Part Number	Description	Fig. No.
310X054A	50 W with Red Cap	50
310C054	50 W with Grounding Chain	51
310X074	75 W with Blue Cap	50
HBC310X075	75 W Precision .1% Tolerance	52
310X094	93 W with Yellow Cap	50
HBC310X075	75 W Precision .1% Tolerance	53
EJ175	50 W Economy	N/S
EJ177	75 W Economy	N/S
EJ179	93 W Economy	N/S
RoHS compliant


Fig. 50	Fig. 51

Fig. 52

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index

- Page 10 -

Coax Crimp Tools

Professional grade hex-crimp tools for coaxial connectors are available in ratchet and non-ratcheting types, both provide dependable service. Ratchet tools feature replaceable dies. Included is a convenient release mechanism to unlatch the ratchet in the event of an improper crimp. Each too also crimps the contact pin to the conductor.

Part Number	Description
BD10100	Hex Crimp Ratchet for "F" Types, RG59, RG6
BDHD100	Hex Crimp Ratchet for Belden 8281
BDHD200	Hex Crimp Ratchet for BNC/TNC RG58,59,62 and MV
BDHD100	Hex Crimp Ratchet for Mini-RG59
BD11012	Hex Crimp Ratchet for "N" Crimp RG11, RG213, RG214
BDHD100	Hex Crimp Ratchet for BNC/TNC RG6, RG59

- Page 11 -