Specifications for "N" Connectors

_____________________________

N Series connectors are medium sized, and weatherproof. The coupling method utilizes a screw system designed for use at frequencies up to microwave. These connectors are particularly useful where precision performance is necessary such as in test equipment, satellite communications, MATV, computer LAN systems, and other high-tech electronic equipment. Because of the quality manufacturing tolerances these connectors ensure excellent performance throughout 0-18GHz.

MATERIALS

  Connector Parts   Material   Equivalent Standard †
  Connector Body and Parts   Brass   ISOCuZn38Pb2 Body Part
  Male Contact Pin   Brass   QQ-B-626
  Outer Contact   Brass   QQ-B-750
  Socket Contact  Beryllium Copper    Phosphor Bronze   QQ-C-530/MIL-H-7199 CuBe2
  Crimp Ferrule  Annealed Copper   QQ-C-576
  Insulators, Standard Versions   PTFE Delrin   L-P403/BS4271     Grade B
  Rubber Gaskets   Silicone Rubber   ASTM-E1418PSI
  Plating   Nickel (Silver Optional)   MIL-G-45204

ELECTRICAL

Requirement Performance Test †
Specification
  Impedance   50 W   75W

-----

  Frequency Range   0-18 GHz   0-1 GHz

-----

  VSWR   1.30 Max.   MIL- C-39012
  RF Insertion Loss   0.2 db Max. at 3 GHz   MIL- C-39012
  RF Leakage   -90 db Min. at 2-3 GHz   MIL- C-39012
  Test Voltage (At Sea Level)   2500V rms   MIL-STD-202
  Working Voltage (At Sea level)   1000V rms   MIL-STD-202
  Insulation Resistance   5000 Megohm Min.   MIL-STD-202
 Contact Resistance   3 Megohm Max.   MIL-C-39012

MECHANICAL & ENVIRONMENTAL

Requirement

Performance

Test †
Specification

 Durability  500 Insertions & Extractions Min.  MIL-C-39012
 Shock  100 G  MIL-STD-202
Vibration  20 G from 80-2000 Hz  MIL-STD-202
 Cable Retention (Cable Types)  60 lbs. Minimum Pull Test  MIL-C-39012
 Coupling Nut  100 lbs. Maximum  MIL-C-39012
 Temperature Range  PTFE: -55 to +199 C        Delrin: -40 to +85 C

----------

 Moisture Resistance  Continuous Test  MIL-STD-202
 Salt Spray  48 Hours  MIL-STD-202

s

†Products are made to conform to the Mil standard but are for commercial applications and not QPL

_____________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111    Back to Index

18

s

- Page 19 -

"N" Connectors

____________________________
Cable Plugs

“N” cable plugs are available in solder/clamp, solder/crimp, and twist-on versions to satisfy the installer’s preference. Standard cable sizes are facilitated with these connectors for applications from satellite TV to Ethernet LAN installations.

 cmpliant

    Part Number

Description       RG/U Cable Fig.
No.
  110A108A      Solder/Clamp Plug   6A

88

  110A108B     Solder/Clamp Plug   8, 213 88
  110A108F     Solder/Clamp Plug   58 88
  110A108G     Solder/Clamp Plug   59, 62 88
  110A205A     Solder/Crimp Plug   6A 89
  110A205B     Solder/Crimp Plug   8, 213 89
  110A205F     Solder/Crimp Plug   58 89
  110A205G     Solder/Crimp Plug   59, 62 89
  110A404B2     Twist-On Plug   Thick-Net 90
  110A404B3     Twist-On Plug   Thick-Net Plenum 90
N male clamp
Fig. 88
N male crimp
Fig. 89
N male twist on
Fig. 90

  RoHS compliant           REQUEST QUOTE          REQUEST DRAWING

Jacks
Two cable jacks and one panel jack style are available as standard items. Other types are available as special order items. The cable jacks utilize the clamp/solder method of assembly and the panel jack will facilitate any cable size by soldering the center conductor to the connector’s solder-cup contact.
N female clamp N female panel jack
Fig. 91 Fig. 92
Part
Number
Description RG/U
Cable
Fig.
No.
  120A108B   Cable Jack, Solder Clamp   8A, 11 91
  120A108F   Cable Jack, Solder Clamp   58, 58A, 58B 91
  120A108G   Cable Jack, Solder Clamp   59, 62 91
  127A577   Panel Jack, Solder Cup   Any 92

                RoHS compliant         REQUEST QUOTE          REQUEST DRAWING

V-Bite ® PC Edge Mount
The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge mounts to the board which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB it disperses rotational torque relief to the board and not the solder points. The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other interfaces available. See “F”, BNC Twin, TNC and N sections.

Part
Number

Description

Fig.
No.

 161V504E

  N type Edge Mount Jack  (TFE Insul for reflow)

98

 161V504EFT

  N type Edge Mount Jack w/ Flange and Threads (TFE Insul for reflow)

99

 162V504E

  N Type Edge Mount Plug (TFE Insul for reflow)

100

N edgemount V-Bite

  RoHS compliant           REQUEST QUOTE          REQUEST DRAWING

              Fig. 98                               Fig. 99                                Fig. 100
Adapters & Terminator
Standard configurations of adapters are machined brass with attractive nickel plating. All contacts are gold plated brass (males) and phosphor bronze (females).
Part
Number
Description Fig.
No.
  132A505   Female/Female Inline  97A
  143A505   F/M/F “T” Adapter 93
  145A505   F/F/F “T” Adapter 94
  151A505   F/M Right Angle Adapter 95
  130A5011  Male/Male Inline (Tri-Plate) 97B
  132A5011   Female/Female (Tri-Plate) 97C
  TC1028   50W Female 96
  RoHS compliant                                                      REQUEST QUOTE     REQUEST DRAWING
 
N male female right angle N T adapter
Fig. 95

                   Fig. 93

s

N female female splice

 

                  Fig. 97A

Fig. 97B Fig. 97C

                  Fig. 94

                                           Fig. 96

s
 

N to 7/16 Adapter Kit

7/16 Adapter Kit ADPT3PA is a 8 piece kit containing 7/16 to N, N to N and 7/16 to 7/16 adapters. Made of machined brass and Tri-Plated bodies. Gold plated contacts.                                                                                                                   

Kits are in zippered leather cases.

 

Part
Number

Description

Fig.
No.

 ADPT3PA

  N to 7/16 Adapter Kit (Tri-Plate)

102

 

 

REQUEST QUOTE         

 

  _____________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111       Back to Index

19

s

- Page 20 -