EZ RJ45 Modular Plugs
EZ RJ45 Modular Plugs
The new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to maintain Category Five, and even enhanced Category 5 and Category 6 capabilities. (50 u in. gold)
The EZ-RJ12™ and both EZ-RJ45™ can be crimped with most any standard tool, then trimmed with a cutter or small utility knife. However, the new BD45000 crimp tool crimps and trims the exposed conductors in one operation. The vertical action of the tool makes a uniform and positive crimp. (Tool will also crimp standard RJ45 and RJ12)



   6P6C EZ-RJ12 Plug RJ12

   8P8C EZ-RJ45 Category 5 Plug RJ45

   8P8C EZ-RJ45 Category 6 Plug   NEW RJ45

  8P8C EZ-RJ45 Shielded Category 6 Plug   NEW RJ45


   Crimp and Trim Tool for EZ RJ12, EZ RJ45 Cat 5 & 6 ----


  Replacement Blades ( 2 per Pkg ) for BD45000 Tool ----


  Cable Boot with Strain Relief ( Required for Cat 6  ) ----


  Cable Boot SNAGLESS  Cat 5 (color: clear) NEW ----


   Cable Boot SNAGLESS Cat 6 (color: clear) NEW ----





   Video Demo                                                                                                 


  BD45000 Crimp & Trim Tool

EZ RJ45 shielded

  EZ-RJ45 Cat 6    Shielded with SNAGLESS Boot       

 EZ RJ45 snagless boot

CXB500/600   Snagless Boot 




Back to Index

FOR TECHNICAL SUPPORT:    PHONE 973-347-4040 / FAX973-347-2111